Welcome! Register now to see your pricing!
Close
Regency® - Steel Narrow Face Crimped Wire Wheel, 0.014" Wire, 1/2" and 5/8" Arbor 6" Outer Diameter, 6000RPM Operating Speed (Pack of 1)
Representative Image Only
• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Wire springs back and is consistently crimped and cut to precise length
• Filaments are securely held in place with a solid steel retaining ring
• Use for roughening for adhesion, surface preparation prior to plating or painting, edge blending, cleaning off rust, scale and dirt, finishing for appearance, and deburring
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Wire springs back and is consistently crimped and cut to precise length
• Filaments are securely held in place with a solid steel retaining ring
• Use for roughening for adhesion, surface preparation prior to plating or painting, edge blending, cleaning off rust, scale and dirt, finishing for appearance, and deburring
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
